HK CC9 Optics Ready 12+1 Used
$499.00
The used HK CC9 is HK USA’s first American-made micro-compact, chambered in 9mm with a DLC-coated slide, optics-ready RMSc footprint, and tritium front sight. Because the CC9 was tested to NATO duty standards across 750,000+ rounds, it delivers reliability well above the micro-compact average. This unit comes with the OEM HK soft case, one 10-round flush magazine, and one 12-round extended magazine — a complete carry package at a pre-owned price.
1 in stock
Description
HK CC9 — Used
When HK set out to build the HK CC9, the goal was simple: take everything that makes full-size HK pistols legendary and compress it into a micro-compact that doesn’t ask you to compromise.
The CC9 is a striker-fired, polymer-frame micro-compact chambered in 9mm, designed and manufactured at HK-USA’s Columbus, Georgia facility. Because this is HK’s first pistol purpose-built for the American concealed carry market, the development team held it to the same NATO AC/225 standards as the company’s full-size duty guns — including over 750,000 rounds of testing before a single unit shipped. The result is a gun that measures just 6.03 inches long and 0.99 inches wide, yet carries a full four-finger grip, a 3.32-inch cold hammer-forged polygonal barrel, and a trigger that reviewers consistently compare to a full-size VP9.
The CC9 ships optics-ready with a direct-mount RMSc/407k footprint cut into the slide, so it pairs directly with today’s most popular micro red dots. Additionally, the slide and barrel both carry a DLC finish — a harder-wearing surface treatment than standard nitride or Cerakote. Furthermore, the ambidextrous controls (dual slide stops and a reversible mag release) make this a genuinely left-hand-friendly platform out of the box.
Key Features — HK CC9
- Striker-fired micro-compact chambered in 9mm, manufactured in Columbus, GA
- 3.32-inch cold hammer-forged polygonal barrel with DLC coating
- Optics-ready slide with direct-mount RMSc/407k footprint
- Tritium front sight with blacked-out serrated notch rear
- Pre-cocked striker trigger with distinct wall and approximately 5 lb. pull
- Fully ambidextrous controls: dual slide stops and ambidextrous magazine release
- Interchangeable backstraps (small and large) for adjustable grip fit
- Integral Picatinny rail on dust cover for lights and laser accessories
- Full safety suite: trigger safety, passive firing pin safety, out-of-battery safety, Safe Take Down
- Tested to NATO AC/225 standards across 750,000+ rounds during development
- Includes OEM HK soft case, one 10-round flush magazine, and one 12-round extended magazine
Why This Product Stands Out
The shootability argument for the CC9 is specific, not generic. HK engineered the CC9 with the same length of pull as the full-size VP9, which means the trigger reach isn’t the compromised short-reach pull that makes many micro pistols harder to shoot accurately. Because of this geometry, the CC9’s trigger — a pre-cocked striker system with a distinct wall and approximately 5 lbs. pull — behaves more like a service pistol trigger than a typical micro-compact trigger. That translates directly to faster split times and tighter groups at carry distances.
Beyond the trigger, the CC9 is one of very few micro-compact pistols to carry a DLC coating on both the barrel and slide. DLC (Diamond-Like Carbon) is significantly harder and more corrosion-resistant than standard matte black finishes, which means this gun holds up better to the sweat, friction, and daily contact that comes with consistent carry. For that reason, a used CC9 in good condition represents real value — the finish is built to outlast ordinary wear.
The optics-ready RMSc/407k cut is also worth noting specifically, since it supports some of the most popular micro red dots on the market — including the Holosun K-series and Shield RMSc. Since the CC9 came to market in late 2024, holster support and aftermarket accessories have grown quickly, and the platform benefits from HK’s established dealer and service network. In short, this is a carry gun that was overbuilt on purpose.
Ideal Use Cases
- Everyday concealed carry (IWB/AIWB)
- Deep concealment
- Backup/off-duty carry
- Home defense
- Range training
Condition
This CC9 shows normal light carry wear consistent with regular use. The DLC finish on the slide and barrel presents cleanly across all surfaces with no visible scratches, gouges, or finish loss. The polymer frame is clean with no cracks or structural damage observed. The grip texture inserts are intact and show no significant wear. The controls — trigger, slide stops, magazine release, and takedown lever — all appear undamaged and factory-correct. The sights are present and undamaged. Furthermore, this unit includes the original HK soft case and both factory magazines (one 10-round flush-fit and one 12-round extended), making it a complete, ready-to-carry package.
Condition Grade: Very Good
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | Heckler & Koch (HK-USA) |
| Model | CC9 Optics Ready |
| Caliber | 9mm |
| Action | Striker-fired, semi-automatic |
| Barrel Length | 3.32 in. |
| Overall Length | 6.03 in. |
| Overall Height | 4.60 in. (10rd) / 4.92 in. (12rd) |
| Overall Width | 0.99 in. |
| Weight | 20 oz. (unloaded, without magazine) |
| Capacity | 12+1 / 10+1 |
| Sights | Tritium front, blacked-out serrated notch rear |
| Optics Ready | Yes — direct-mount RMSc/407k footprint |
| Frame Material | Reinforced polymer with steel fire control chassis |
| Slide/Barrel Finish | DLC (Diamond-Like Carbon) |
| Rifling | Polygonal, cold hammer-forged |
| Safety | Trigger safety, passive firing pin safety, out-of-battery safety, Safe Take Down |
| Controls | Fully ambidextrous (dual slide stops, ambidextrous mag release) |
| Rail | Integral Picatinny (MIL-STD-1913) |
| Country of Manufacture | USA (Columbus, GA) |
| Included Accessories | OEM HK soft case, 1x 10-round flush magazine, 1x 12-round extended magazine |
| Condition | Very Good |
| UPC | N/A |
| SKU | N/A |
Compatibility Information
Optic Compatibility The CC9 slide features a direct-mount RMSc/407k footprint. Compatible optics include the Shield RMSc, Holosun 407K, Holosun 507K, and other optics using the same footprint.
Accessory Rail Compatibility The Picatinny-style rail on the dust cover accommodates compact weapon lights and laser units sized for sub-compact pistols. Verify dimensions with your preferred light manufacturer before purchase.
Magazine Compatibility This unit includes one OEM HK CC9 10-round flush-fit magazine and one OEM HK CC9 12-round extended magazine. Aftermarket CC9 magazines are available; verify fitment before use.
Holster Fitment The CC9 has a growing holster ecosystem. Verify current compatibility with your preferred holster manufacturer, as offerings continue to expand for this platform.
Manufacturer: Heckler & Koch USA | Model: CC9 Optics Ready | Type: Semi-Auto Pistol | Caliber: 9mm | UPC: N/A | SKU: N/A
THIS FIREARM REQUIRES TRANSFER THROUGH A LICENSED FFL DEALER. ALL APPLICABLE FEDERAL, STATE, AND LOCAL LAWS APPLY.










