Glock 17 Gen5 9mm Used

Description

Glock 17 Gen5 9mm — Used

A pre-owned Glock 17 Gen5 9mm is the cheapest honest way to put the pistol that set the standard for duty guns into your safe.

Glock built the 17 as a full-size service pistol, and the Gen 5 revision is where the design finally caught up to how people actually shoot it. The frame lost its finger grooves, which means the grip accommodates a wide range of hands instead of dictating where your fingers land. Alongside that change, Glock added a flared magwell for faster reloads and an ambidextrous slide stop lever that works from either side. The barrel drew attention as well, since modified rifling and a recut crown tightened the gun’s mechanical accuracy. Because the 4.49-inch barrel stretches the sight radius to 6.50 inches with the factory polymer sights, that accuracy stays easy to reach from behind the trigger.

This particular Glock 17 Gen5 9mm arrived as a complete factory package and shows essentially nothing for its time out of the box. Three factory 17-round magazines ship with the pistol, along with the original Glock hard case, the magazine loader, and the factory backstraps. Since the backstraps are accounted for, you can tune grip circumference without sourcing parts separately. The slide carries factory serrations at both the front and the rear, which gives you a positive purchase for press checks and malfunction clearing. Factory polymer sights remain in place, while the barrel stays unthreaded and unported exactly as Glock built it.

Key Features — Glock 17 Gen5 9mm

Because this unit came through complete, the list below covers the pistol and everything that ships in the case with it.

• Full-size 9x19mm service pistol, 17+1 capacity with the included factory magazines
• 4.49-inch barrel with Gen 5 modified rifling and recut crown
• 6.50-inch sight radius with the factory polymer sights
• Gen 5 frame with no finger grooves and interchangeable backstraps
• Flared magwell for faster, more forgiving reloads
• Ambidextrous slide stop lever
• Factory slide serrations at both the front and the rear
• Factory accessory rail for weapon lights and lasers
• Austrian production, slide marked GLOCK 17 Gen5 AUSTRIA 9×19
• Three factory 17-round magazines
• Original Glock hard case, magazine loader, backstrap set

 

Why This Product Stands Out

The 17’s case rests on institutional weight rather than any single clever feature. Given that more agencies, militaries, instructors, and competitors have run this frame than any other pistol on earth, the support ecosystem around it has no real rival. Holsters, magazines, sights, triggers, and lights exist for the platform in numbers that keep parts cheap and available. Across a decade of ownership, that availability matters far more than any spec-sheet advantage a newer design might claim.

Gen 5 specifically fixed the complaints shooters had been making for twenty years. The finger grooves went away, so the grip now works for hands the old frame fought. Alongside that, the ambidextrous slide stop finally made the gun symmetrical for left-handed shooters, while the flared magwell shaved real time off reloads under pressure. Glock reworked the barrel in the same generation, which is why a Gen 5 gun typically prints tighter groups than the Gen 3 and Gen 4 pistols that came before it.

Shootability is where the full-size frame quietly separates itself from the compacts. The grip fills your hand, the slide runs 22.22 ounces before you load it, and the sight radius stretches past six and a half inches. As a result, recoil settles faster and the sights return closer to where they started, especially across a long training day or a multi-stage match.

Ideal Use Cases

Since the 17 was designed as a duty pistol first, it covers the roles that reward size over concealment:

• Duty and uniformed carry
• Home and nightstand defense
• Range training and instruction
• USPSA and IDPA production-division competition
• Vehicle and truck-gun use

 

Condition

Excellent. The slide finish is complete across both flats, the top, the muzzle end, and the breech end, with no holster wear, no bright edges along any serration group, and no finish loss around the ejection port. Frame texture stays sharp on both grip panels, the front strap, the backstrap, and the flared magwell lip — in particular the web-of-hand contact point where a carried Glock polishes first. Likewise, the slide stop levers, magazine catch, takedown lever, and trigger safety blade show no burnishing.

The muzzle crown is clean and undamaged, and the barrel hood carries its factory 9×19 and Austrian proof markings. All three magazines are clean with intact feed lips and factory orange followers, though one magazine carries a hand-applied inventory marking on the baseplate from a previous owner. That marking is cosmetic and affects nothing mechanically. This pistol presents as unfired or very close to it.

The bore interior, breech face, extractor, and striker channel do not appear in the listing photos, so those surfaces remain available for inspection in person at our Fort Worth counter.

Technical Specifications

 

Compatibility Information

Magazine Compatibility This pistol accepts Glock 17 magazines in the factory 17-round capacity. Glock also lists 19-, 24-, 31-, and 33-round magazines as options for the platform, since all of them share the same double-stack 9mm body profile. Shorter Glock 19 and Glock 26 magazines will seat and function too, although they leave a gap below the grip.

Holster Fitment Holster support for the 17 is as deep as it gets in the handgun market. Because the Gen 3, Gen 4, and Gen 5 Glock 17 share nearly identical exterior dimensions, most holsters cut for any G17 generation will index correctly on this frame. If you run a weapon light, choose a holster molded for that specific light rather than a bare-gun shell.

Optic Compatibility This is a standard Gen 5 slide, not an MOS variant, which means there is no factory optic cut. Mounting a red dot therefore requires aftermarket slide milling or a replacement optic-ready slide.

Accessory Rail Compatibility The dust cover carries Glock’s factory accessory rail. Most major weapon lights and lasers ship with a Glock-pattern mounting key, so fitment is generally straightforward.

Suppressor Compatibility The factory barrel is not threaded. For that reason, suppressor use requires an aftermarket threaded barrel in 1/2×28.

---

Manufacturer: Glock | Model: 17 Gen5 | Type: Semi-Automatic Pistol | Caliber: 9x19mm

Condition: Excellent — pre-owned pistol with full finish retention, crisp frame texture, and no visible wear.

THIS FIREARM REQUIRES TRANSFER THROUGH A LICENSED FFL DEALER. ALL APPLICABLE FEDERAL, STATE, AND LOCAL LAWS APPLY.