YHM Turbo T3 Suppressor
Original price was: $674.95.$619.00Current price is: $619.00.
The YHM Turbo T3 suppressor pairs a full-auto rating with a 134 dB average sound level in a compact 5.59-inch (6.5-inch with the Phantom Q.D. Adapter) package built from heat-treated 17-4 stainless steel. Its 1 3/8″-24 HUB rear thread accepts the included Phantom Q.D. Adapter, which mounts to any 1/2″-28 barrel through the bundled Q.D. flash hider for fast on-and-off use. Because it ships complete with the flash hider, adapter, and two wrenches, it’s an accessible, full-featured entry point into suppressed 5.56 shooting.
Out of stock
Description
YHM Turbo T3 Suppressor
The YHM Turbo T3 suppressor exists to answer one question honestly: how much real sound reduction can a 5.56 shooter get without paying boutique-suppressor prices for it?
Yankee Hill Machine builds the T3 from heat-treated 17-4 stainless steel, then rates the finished can for full-auto fire, since a suppressor meant for a hard-use AR platform needs to survive more than an occasional range trip. Because the rear of the can threads onto YHM’s 1 3/8″-24 HUB interface, it accepts the included Phantom Q.D. Adapter instead of locking the shooter into a direct-thread-only mount. That adapter clamps onto any 1/2″-28 barrel through the included Q.D. flash hider, so removing and reinstalling the can takes seconds rather than a wrench and a witness mark. Bare length runs 5.59 inches, stretching to 6.5 inches once the adapter goes on.
Weight tells a similar story: the T3 comes in at 10.5 ounces bare and 12.8 ounces with the Phantom Q.D. Adapter attached, light enough that most AR builds barely notice it forward of the front sight base. YHM also reworked the internal baffle geometry on this generation specifically to cut blowback compared to the earlier Turbo T2, which matters to anyone who has had a suppressed AR push gas back through the charging handle mid-string. Every T3 ships complete: the Q.D. flash hider, the Phantom Q.D. Adapter, and two suppressor wrenches for mounting and service, so there’s nothing extra to source before it goes on a rifle.
Key Features — YHM Turbo T3 Suppressor
The features below come from a mount system built for a 5.56 quick detach suppressor that moves between rifles, not one that just sits admired in a safe.
- 5.56 NATO / .223 Remington rated, full-auto rated for hard use
- Heat-treated 17-4 stainless steel construction
- 134 dB average sound pressure level (14.5″ AR, 55-grain ammunition)
- 10.5 oz bare / 12.8 oz with the Phantom Q.D. Adapter installed
- 5.59″ bare / 6.5″ overall with the Phantom Q.D. Adapter installed
- 1.5625″ diameter
- Rear 1 3/8″-24 HUB thread interface
- Includes 1/2″x28 Q.D. Flash Hider, Phantom Q.D. Adapter, and two suppressor wrenches
- Redesigned internal baffle geometry for reduced blowback versus the previous Turbo generation
- 10″ minimum rated barrel length for 5.56 NATO
- Made in the USA
Why This Product Stands Out
Quick-detach suppressors live or die on how well the mount actually locks up, and YHM addresses that from both ends. Because the T3’s rear HUB thread accepts the Phantom Q.D. Adapter directly, and that same adapter clamps onto any 1/2″-28 muzzle device, a shooter running multiple 5.56 uppers can standardize on one can and move it between rifles in the time it takes to loosen and retighten a single collar. That flexibility matters more once a household or a range bag has more than one AR in it.
A full-auto rating is not a marketing footnote on a can built from 17-4 stainless — it states how much heat and cyclic stress the housing and mount can absorb before anything loosens or warps. Paired with the redesigned baffle geometry that cuts blowback compared to the earlier Turbo T2, the T3 stays more comfortable behind an optic through a longer string of fire, since less gas coming back through the action means less debris finding its way toward a shooter’s eyes.
What ultimately sets the T3 apart is the math. A 134 dB suppressor with a full-auto rating and a proven Q.D. mount usually costs more than YHM prices this one at, and that gap is what makes it an easy first can for a shooter building out a suppressed AR rather than a purchase that competes with a rifle or an optic for the same budget.
Ideal Use Cases
- Suppressor host for AR-platform rifles chambered in 5.56 NATO or .223 Remington
- Home defense rifles where reduced report and blowback matter
- Range and training use across multiple 5.56 uppers via the Q.D. mount
- Hunting rifles in 5.56/.223 where a reduced sound signature matters
- Shooters building their first suppressed AR who want a full-auto-rated can at an accessible price
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | Yankee Hill Machine Co. |
| Model | Turbo T3 |
| Manufacturer Part # | YHM-2175-28 |
| UPC | 841812101703 |
| Caliber | 5.56 NATO / .223 Remington |
| Type | Rifle Suppressor (Quick Detach) |
| Construction | Heat-treated 17-4 stainless steel |
| Finish | Black |
| Weight | 10.5 oz bare / 12.8 oz with Phantom Q.D. Adapter |
| Overall Length | 5.59″ bare / 6.5″ with Phantom Q.D. Adapter |
| Diameter | 1.5625″ |
| Rear Thread / Mount Interface | 1 3/8″-24 HUB |
| Muzzle Device Thread | 1/2″-28 (via Phantom Q.D. Adapter) |
| Decibel Rating | 134 dB average (14.5″ AR, 55-grain ammunition) |
| Minimum Rated Barrel Length | 10″ (5.56 NATO) |
| Full Auto Rated | Yes |
| Included Accessories | Q.D. Flash Hider, Phantom Q.D. Adapter, two suppressor wrenches |
| Country of Origin | USA |
Compatibility Information
Host Caliber Compatibility — Rated for 5.56 NATO and .223 Remington rifles with a minimum 10-inch barrel, given that YHM does not publish a rating for this suppressor below that barrel length.
Suppressor Mount Compatibility — The T3’s rear end threads onto YHM’s 1 3/8″-24 HUB pattern, the same interface the included Phantom Q.D. Adapter uses, so a shooter already running a Phantom Q.D. Adapter or another HUB-pattern muzzle device on a different rifle can move this can between hosts without an extra part.
Muzzle Device / Thread Pitch Compatibility — The included Phantom Q.D. Adapter mounts to any 1/2″-28 threaded 5.56 barrel through the bundled Q.D. flash hider. A barrel cut to a different thread pitch needs a separate thread adapter, which TX Arms can help source.
NFA COMPLIANCE NOTICE
This item is regulated under the National Firearms Act (NFA). Purchase requires completion of ATF Form 4, and compliance with all federal, state, and local regulations.
Manufacturer: Yankee Hill Machine Co. | Model: Turbo T3 | Type: Rifle Suppressor | Caliber: 5.56 NATO / .223 Remington | UPC: 841812101703 | SKU: YHM-2175-28
THIS ITEM TRANSFERS ON AN ATF FORM 4 THROUGH TX ARMS OR YOUR LOCAL FFL/SOT DEALER. ALL NFA RULES AND REGULATIONS APPLY.




