B&T TiGER22 Ti
$399.99
The B&T TiGER22 Ti suppressor packs full-auto-rated .22 LR suppression into a 3D-printed titanium body that weighs just 4 ounces and measures 5.1 inches. Because B&T also rates it for 5.7x28mm and bolt-action .223 Remington, one can covers a rimfire host, a 5.7 pistol, and a bolt gun without building out a caliber-specific collection. It threads on directly at 1/2×28 and ships ready to run.
Out of stock
Description
B&T TiGER22 Ti
The B&T TiGER22 Ti suppressor solves the one problem that follows most rimfire shooters chasing sound reduction: how do you add real, full-auto-rated suppression to a .22 host without turning it into a nose-heavy compromise?
B&T builds the TiGER22 Ti around its Print-X process, 3D-printing the entire body from a single piece of weldless titanium instead of machining and welding separate components together. Because that process removes seams and joints altogether, the can holds up to sustained cycling in a way a traditionally welded housing eventually can’t. At just 4 ounces and 5.1 inches, the TiGER22 Ti barely registers on a 10/22, a Ruger Mark IV, or any other rimfire host built around a 1/2×28 thread, which is why B&T rates it full-auto for .22 LR instead of limiting it to semi-auto duty like most rimfire cans in this weight class.
Beyond straight .22 LR use, the TiGER22 Ti also carries a 5.7x28mm rating and a bolt-action .223 Remington rating, so one can covers a rimfire host, a 5.7 pistol, and a bolt gun without a lineup of caliber-specific suppressors. The housing wears a Type 2 anodized finish rather than raw titanium, which means the gray exterior resists handling wear better than an unfinished can would. The direct-thread 1/2×28 mount keeps installation simple, though it’s worth noting upfront that this is a fixed direct-thread design rather than a quick-detach mount, so removing it means unthreading it by hand each time rather than releasing a lever.
Key Features — B&T TiGER22 Ti Suppressor
- Full-auto rated for .22 LR
- Also rated for 5.7x28mm and bolt-action .223 Remington platforms
- 3D-printed, weldless titanium construction (B&T Print-X process)
- 5.1-inch overall length, 1.2-inch diameter
- 4 ounces
- 1/2×28 direct thread mount (not compatible with HUB-style quick-detach systems)
- Type 2 anodized gray finish
- User-serviceable design
- Made in the USA
- Backed by B&T’s lifetime limited warranty
Why This Product Stands Out
Weight is where most .22 suppressors give something up, since steel and aluminum cans that claim full-auto ratings usually cross the 6 to 8-ounce mark to survive the heat and cyclic stress that comes with it. B&T avoids that trade-off here by printing the TiGER22 Ti from titanium rather than machining it from a heavier metal, which is what lets a can this light still carry a full-auto rating for .22 LR instead of the semi-auto-only rating most lightweight rimfire suppressors settle for.
Multi-caliber coverage is the other reason this can earns a spot on the shelf instead of just a spot in the safe. A shooter running a 10/22 for plinking, a 5.7 pistol for the range, and a bolt-action .223 for pest control would otherwise need three separate suppressors, and three separate NFA transfers, to cover all of it. Because the TiGER22 Ti carries verified ratings across all three calibers, one Form 4 and one can does the job that would otherwise take a small collection.
The weldless construction matters more than it sounds like it should. A traditionally built suppressor relies on welds to hold baffles and end caps together, and welds are exactly where a suppressor housing eventually cracks under sustained heat cycling. Since B&T prints the TiGER22 Ti as a single titanium piece with no seams to fail, that specific failure point simply isn’t part of the design.
Ideal Use Cases
- Small game hunting and pest control with a rimfire host
- Recreational plinking and target shooting
- Suppressed 5.7x28mm pistols and PDWs
- Bolt-action .223 Remington platforms
- Shooters standardizing on one lightweight can across multiple hosts
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | B&T USA |
| Model | TiGER22 Ti |
| SKU / MPN | SD-TiGer22-Ti |
| UPC | 840225716399 |
| Type | Suppressor |
| Caliber Rating | .22 LR (full-auto rated), 5.7x28mm, .223 Remington (bolt-action only) |
| Overall Length | 5.1 in (130 mm) |
| Diameter | 1.2 in (30 mm) |
| Weight | 4 oz |
| Material | Titanium — 3D-printed, weldless (B&T Print-X process) |
| Color | Gray |
| Finish | Type 2 Anodized |
| Thread Pitch | 1/2×28 |
| Attachment | Direct Thread |
| Mount Type | Fixed direct thread — not HUB or quick-detach compatible |
| User-Serviceable | Yes |
| Country of Origin | USA |
| Manufacturer Warranty | B&T lifetime limited warranty |
Compatibility Information
Host Platform Compatibility — Given that the TiGER22 Ti carries verified ratings for .22 LR (full-auto), 5.7x28mm, and bolt-action .223 Remington, it mounts to any host chambered in one of those calibers and threaded 1/2×28, including most 10/22-pattern rifles, AR-platform .22 conversions, 5.7 pistols such as the FN Five-seveN or Ruger-57, and bolt-action .223 rifles cut to that thread pitch.
Mount / Thread Compatibility — The TiGER22 Ti threads on directly at 1/2×28, so no adapter or booster is required on a host already cut to that pitch. That said, this is a fixed direct-thread suppressor rather than a quick-detach design, which means it is not compatible with HUB-style or other quick-detach mounting systems — removing it means unthreading it by hand rather than releasing a lever.
NFA Compliance Notice
This item is regulated under the National Firearms Act (NFA). Purchase requires completion of ATF Form 4, and compliance with all federal, state, and local regulations.
Manufacturer: B&T USA | Model: TiGER22 Ti | Type: Suppressor | Caliber: .22 LR | UPC: 840225716399 | SKU: SD-TiGer22-Ti
THIS ITEM TRANSFERS ON AN ATF FORM 4 THROUGH TX ARMS OR YOUR LOCAL FFL/SOT DEALER. ALL NFA RULES AND REGULATIONS APPLY.




